Pricing
You may also like
Explore these related Cerakote products that complement your selection.
Shop All Cerakote Coatings Cerakote Tungsten is a dark graphite grey with silver metallic.
*NOTE: This product comes with a catalyst and requires a 100 Mesh Strainer (SE-275).
Cerakote H Series coatings are durable, corrosion-resistant, and provide unparalleled levels of hardness and adhesion. These coatings are also resistant to most solvents and chemicals. The foundation for Cerakote H Series coatings is a unique ceramic technology that imparts both flexibility and excellent wear resistance to the final coating. Check out the Resources section for product application guides, technical data sheets and SDS information.
TUNGSTEN
SKU: H-237
| Specification | Value |
|---|---|
| % Solids | 29 |
| Recommended Mil Thickness (mil) | 1 mil |
| Corrosion Resistance ASTM B117 (hrs) | 2000+ |
| Strainer Size (mesh) | 100 (Part # SE-275) |
| Color Stability (F°) Max. Temp. | 450 |
| Coating Stability (F°) Max. Temp. | 500+ |
| Theoretical Coverage per gal @ Recommended Mil Thickness (ft2) | 471 |
| Impact Performance† Direct/Indirect ASTM D2794 | 160 in-lbs/160 in-lbs |
| Hardness† Scratch ASTM D3363 | 8H |
| Viscosity (cP)** | 31 |
| Hardness† Gouge ASTM D3363 | 9H |
| Adhesion† (Crosscut Adhesion) ASTM D3359 | 5B |
| Gloss Units* | 3 |
| Flexibility† (Conical Mandrel Bend) ASTM D522 | 100% Resistance |
| Recommended Cure Temp (F°) | 250-300 |
| Chemical Resistance‡ (Common Solvents & Diesel) | Excellent |
| Density (g/mL) | 1.42 |
| UV Stability | Good |
| Gloss Level* | Flat |
| Cure Schedule | Ambient Flash 15 Minutes, Oven Cure 2 Hours @ 250°F |
| Recommended Thickness (mil) | 1 |
| Strainer Size (mesh) | 150 (Part # SE-276) |
| Crosscut Adhesion ASTM D3359 | 5B |
| Flexibility (% Resistance) Conical Mandrel Bend ASTM D522 | 100 |
| Impact Performance Direct/Indirect (in-lbs.) ASTM D2794 | 160/160 |
Safety Data Sheet
Application Guide
Note on Custom/Large Orders: Bulk orders or specialized formulations may require additional lead time. If your order requires extra processing time, our team will notify you immediately.
Admin
—
What do you use to thin Cerakote?
Answer from Admin
We don't recommend adding or removing anything from our coatings in hopes of adjusting the viscosity if it's too thick or thin. Doing so may jeopardize the performance and longevity of what we know our products are capable of. There are ways to mitigate coating from reaching a point of unusable status. The articles below provide information on Cerakote® shelf-life, storage and agitation to assist with longevity.
What is the Shelf-Life of Cerakote?
Nick Ghobashi
—
I like the Tungsten H-237 sample color. I am coating a Harley motor. Do you have this color for C series?
Answer from Admin
We do have a C-111 tungsten in our air cure C series. It's not an exact match, but it is close. The C series tungsten has more of a 'gold' hue to the metallic coating.
Admin
—
How should I etch Fiber Glass?
Answer from josh benton
There are two options to etch Carbon Fiber, Fiber Glass, Plastic, Polymers, and soft substrates.
1) Lightly sandblast with #100 grit Aluminum Oxide or Garnet Sand (between 30-40PSI) to give the surface a blasted profile.
2) Use a Red Scotch Brite pad to provide a suitable etch.
Page 1 of 6
See more projects using Tungsten H-237 in our gallery.
| Starting quantity | Price per item | Savings |
|---|---|---|
| 1 item | US$ 35.00 | — |
US$ 35.00 / per item
Starting quantity: 1 item
Total for 1 item: $35.00
Estimated lead time: 0 days days
US$ 35.00
per itemH-237
TUNGSTEN
US$ 35.00
/ item
