Satin Aluminum
Add to Wish List
Item:
F-112
Inventory:
In Stock
Description:
F-Series is specifically engineered for high volume production and manufacturing due to its fast cure time and low temperature curing schedule. It is an oven cure, two-part coating that is applied directly to the substrate. F-Series has all the attributes you have come to expect from Cerakote. It has unmatched corrosion and chemical resistance, superior adhesion and flexibility, as well as exceptional hardness, durability and wear.
F-Series is:
- PFAS free
- Fast Curing – cures in 15 minutes at 250°F
- Or cure as low as 180°F for 1 hour in a paint booth
- Can cure large parts quickly
- High volume/production friendly
- Reduces bottle necks
- Achieves higher throughput
- Saves significant time and energy costs
- Puts more revenue into your business
WARNING: This product may expose you to chemicals known to the State of California to cause cancer. For more information, see the product's safety data sheet.
Product Technical Data:
All results based on blasted steel coated at recommended mil thickness using recommended cure schedule.
*Gloss levels are measured at a 60° angle. Adjustments to recommended conditions will yield different results. Gloss is affected by quality of preparation and spray technique. Results are based on coated blasted steel cured following the Cure Schedule specification.
**Viscosity measured under ambient conditions (air temperature, relative humidity) at the time of manufacture.
¶Recommended Cure Temperature:
- Please reference the Cure Schedule specification available on each Cerakote product.
Maximum Temperature is the temperature to which the color or coating is stable.
‡Chemical Resistance Testing: Results refer to color change based on CIE76 formulation. Results range from:
- Excellent: ∆E change of <2.5
- Good: ∆E change of <3.0
- Fair: ∆E change of <3.5
- Poor: ∆E change of <4.0
†Testing parameters are as follows:
- Hardness or Pencil Hardness Tests are measured from softest to hardest as follows: 9B, 8B, 7B, 6B, 5B, 4B, 3B, 2B, B, HB, F, H, 2H, 3H, 4H, 5H, 6H, 7H, 8H, 9H. 9H is the hardest.
- SG-100 ONLY: Hardness test Method A — An X-cut is made through the film to the substrate, pressure-sensitive tape is applied over the cut and then removed, and adhesion is assessed qualitatively on a 0 to 5 scale.
- Adhesion is measured on a scale of 0B, 1B, 2B, 3B, 4B, 5B, with 5B being the highest achievable rating.
- Flexibility or Conical Mandrel Bend: “100% Resistance” is the highest achievable rating and indicates that the coating did not crack or spall.
- Impact Performance (Direct/Indirect) is measured on a scale of 0 inch-lbs. to 160 inch-lbs., with 160 inch-lbs. being the highest achievable rating.
All Cerakote coatings are VOC compliant under the EPA and have low to no VOC content. To find out the VOC content of an individual coating, please contact sds@nicindustries.com for more information.
This information is accurate to the best of our knowledge, however, it shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. We recommend that you perform adequate tests in your facility to determine if this product meets all of your requirements.
Please feel free to email us at info@cerakote.com or call us at 1-866-774-7628 if you have any questions.
Product Support
Have questions about this product?
Ask A QuestionKnowledge Base FAQ
Congratulations, your account has been created.
Added To Cart
Amount: $0.00 /unit
Quantity: 1