FREE Master Swatch Set With a $1000 Order. Use Code: MASTERSET

Cerakoted E-190 20150 And Mc-161 Matte Ceramic Clear

The Honey Badger We Have At Home Coated With Cerakote In E-190, H-235 And H-214

20150

Name: 20150
Brand: Cerakote
SKU: E-190
Price: 35.00 USD
Availability: InStock

Add to Wish List

Item: E-190
Inventory: In Stock

Price per item: $35.00

Quantity:

Size:

Total Price:

$35.00 ($35.00 / item)

Description:

Cerakote Elite 20150 is a warm brown with an orange hue and is the color match for Federal Standard 20150 and will meet the government contract color specifications. It is the ONLY matching finish that meets SURG requirements. We have taken the industry leading performance of Cerakote H Series to the next level and improved hardness, abrasion resistance and lubricity, all in a thinner application. We have accomplished this by developing an advanced resin technology that enables the incorporation of the highest performance engineered ceramics. Hydrophobic Properties: The contact angle of Cerakote Elite Series was measured using the dependent drop method, in which the contact angle is measured from the solid surface to the liquid drop. A measurement of 90° or higher is considered hydrophobic. Cerakote Elite series coatings measured at a contact angle as high as 107° which is considered hydrophobic. Note: All Elite products come with a catalyst and require a 325 Mesh Strainer (SE-277). Find product application guides, technical data sheets and SDS information in the Resources section. Cerakote Mixing Calculator

Proposition 65 Warning

WARNING: This product may expose you to chemicals known to the State of California to cause cancer. For more information, see the product's safety data sheet.

Product Technical Data:

Cure Schedule

Ambient Flash 15 Minutes, Oven Cure 1 Hour @ 300°F

Recommended Thickness (mil)

.75

Strainer Size (mesh)

325 (Part # SE-277)

Gloss Level / Units (GU)

Matte / 9

Density (g/mL)

1.42

% Solids (±2%)

Viscosity (cP)

Theoretical Coverage per gal @ Recommended Mil Thickness (ft²)

928

Coating Stability (°F) Max. Temp.

500+

Color Stability (°F) Max. Temp.

400

Chemical Resistance

Fair

UV Stability

Excellent

Corrosion Resistance (Hrs) ASTM B117

4000+

Pencil Hardness Gouge ASTM D3363

Pencil Hardness Scratch ASTM D3363

Crosscut Adhesion ASTM D3359

Flexibility (% Resistance) Conical Mandrel Bend ASTM D522

100

Impact Performance Direct/Indirect (in-lbs.) ASTM D2794

160/160

All results based on blasted steel coated at recommended mil thickness using recommended cure schedule.

*Gloss levels are measured at a 60° angle. Adjustments to recommended conditions will yield different results. Gloss is affected by quality of preparation and spray technique. Results are based on coated blasted steel cured following the Cure Schedule specification.

**Viscosity measured under ambient conditions (air temperature, relative humidity) at the time of manufacture.

¶Recommended Cure Temperature:

Please reference the Cure Schedule specification available on each Cerakote product.

Maximum Temperature is the temperature to which the color or coating is stable.

‡Chemical Resistance Testing: Results refer to color change based on CIE76 formulation. Results range from:

Excellent: ∆E change of <2.5
Good: ∆E change of <3.0
Fair: ∆E change of <3.5
Poor: ∆E change of <4.0

†Testing parameters are as follows:

Hardness or Pencil Hardness Tests are measured from softest to hardest as follows: 9B, 8B, 7B, 6B, 5B, 4B, 3B, 2B, B, HB, F, H, 2H, 3H, 4H, 5H, 6H, 7H, 8H, 9H. 9H is the hardest.
SG-100 ONLY: Hardness test Method A — An X-cut is made through the film to the substrate, pressure-sensitive tape is applied over the cut and then removed, and adhesion is assessed qualitatively on a 0 to 5 scale.
Adhesion is measured on a scale of 0B, 1B, 2B, 3B, 4B, 5B, with 5B being the highest achievable rating.
Flexibility or Conical Mandrel Bend: “100% Resistance” is the highest achievable rating and indicates that the coating did not crack or spall.
Impact Performance (Direct/Indirect) is measured on a scale of 0 inch-lbs. to 160 inch-lbs., with 160 inch-lbs. being the highest achievable rating.

All Cerakote coatings are VOC compliant under the EPA and have low to no VOC content. To find out the VOC content of an individual coating, please contact sds@nicindustries.com for more information.

This information is accurate to the best of our knowledge, however, it shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. We recommend that you perform adequate tests in your facility to determine if this product meets all of your requirements.

Please feel free to email us at info@cerakote.com or call us at 1-866-774-7628 if you have any questions.